Breitling NAVITIMER B01 Mode D'emploi page 57

USING THE CHRONOGRAPH
I. M
EASURING A SINGLE SHORT TIME
1. Press pushpiece A to start the chronograph.
Hand 3 shows the measurement in seconds.
2. Stop the measurement by pressing pushpiece A once more.
The measurement is made in hours (totalizer 1), minutes
(totalizer 2), seconds and / of a second (hand 3).
1
4
3. Reset the chronograph to zero by pressing pushpiece B
.
14
II. M
EASURING AN INTERRUPTED SHORT TIME
1. Press pushpiece A to start the chronograph. Hand 3 shows the
measurement in seconds.
2. To interrupt the measurement, press pushpiece A once more.
To restart the time measurement, press pushpiece A. This
procedure makes it possible to add up several short times.
3. The chronograph is reset to zero by pressing pushpiece B,
once the fi nal measurement has been stopped.
15 15