Cooper Hand Tools WELLER BP860 Guide D'utilisation page 6

BP860 Cordless
Battery Powered
9.After soldering, slide the switch to the "OFF" positi-
Soldering Tool
Thanks you for purchasing the BP860 battery powered
cordless soldering tool from Weller. This is the latest
in a line of both cordless and corded soldering and hot
air tools from Weller - the world's leading maker of
soldering products. With proper care, your BP860 tool
will give you years of reliable service.
BP860 is a lightweight, fast heat-up soldering iron
Maintenance
ideal for field service work where electricity is not rea-
1.If it takes more than 30 seconds to reach working
dily available. The heating element coil is contained in
the tip for super-fast heat-up. Use this tool for light
2.Use alkaline batteries for best results. Do not mix
duty soldering jobs where portability is necessary.
3.Do not change the soldering tip when hot. Use the
Safety Notes
4.The soldering tip is iron plated for long life. Do not
1.Tip is hot! Do not touch the tip or you may get
severely burned.
5.Remove the batteries from the tool when not using
2.Do not immerse in water!
3.Allow the tip to cool after use before storing away.
4.Place the protective cover over the tip when storing
Spare Tips
so that the cover secures the safety slide switch in
the "OFF" position.
Cat. No.
BP10EU
Operating Instructions BP11EU
1.To install batteries, remove the battery cover by
pinching the clips on the sides of the battery cover
Weller Consumer Soldering Iron Warranty
and lifting off. Cooper Hand Tools warrants this product will be free
2.Place (4) 1.5 V size AA alkaline batteries (included) from defects in material and workmanship for a
into the iron as illustrated and replace the cover. period of two (2) years from the date of purchase. No
warranty is made with respect to products which have
been
(a) altered, modified or repaired by anyone other than
Cooper Hand Tools;
(b) subject to abuse, improper use, negligence, accor-
dance with normal practices or the instructions and
3.Remove the protective cover from the tip. specifications of Cooper Hand Tools;
4. Make sure the tip is securely installed. (c) used in conjunction with any product, device, com-
5. Slide the ON/OFF switch to the "I" for lower power ponent or system, that is either defective, the source
(450°C) setting or "II" for higher power (510°C)
of a defect, or not reasonably intended to be used in
6.Hold the soldering iron like a pen. Press and hold conjunction with this product.
the round buttonon top of the On/Off slide switch
continuously. The iron heats up to solder melting The foregoing limited warranty is exclusive and in lieu
point in about 15 seconds.
of all other warranties, whether expressed, implied or
7.To extend battery life, only press the button when statutory, including, but not limited to, any warranty of
soldering. merchantability or fitness for any particular purpose.
8.Place the hot soldering iron standing upright so the The obligation of Cooper Hand Tools under this limited
warranty is expressly limited to repairing the product,
tip does not come in contact with surrounding refunding the purchase price or replacing the product,
objects. at the sole and absolute discretion of Cooper Hand
Tools, at no charge to Buyer.
on and replace the protective cover.
The remedies provided for herein shall constitute the
sole recourse of Buyer againsts Cooper Hand Tools,
wheter the claim is made in tort or in contract, inclu-
ding claims based on warranty, negligence, strict lia-
bility, deceit, fraud, misrepresentation or otherwise. In
no event shall Cooper Hand Tools be liable for special,
indircet, incidental or consequential damages (regar-
less of the form of action), nor for lost profits. Cooper
Hand Tools liability for any claims or damages arising
out of or connected with the manufacture, sale, deli-
temperature, install fresh batteries. very, use, maintenance, repair or modification of this
product shakk not exceed its purchase price.
old and new batteries.
Cooper Hand Tools will, during the warranty period,
tip exchanger provided to remove the tip as shown. repair, replace or refund the purchase price of any
product found to be defective in accordance with this
file the tip as filing will destory the plating. limited warranty.Return freight prepaid with proof of
purchase to:
for prolonged periods to prevent batteries from lea-
Cooper Tools B.V.
king into the tools.
Phileas Foggstraat 16
7821 AK Emmen Drenthe
The Netherlands
Phone: (0591) 66 75 00
Description
Fax: (0591) 66 75 95
Conical
Screwdriver