Zanussi ZRB22130WA Manuel D'utilisation page 11

3. Remove the upper hinge core, transfer
it to the left side, tighten securely and
then put it in a safe place.
4. Remove the two flange screws and then
remove the middle hinge that holds the
lower door in place. Lift the lower door
and place it on a padded surface to
prevent it from being scratched.
5. Remove the hinge hole covers from the
right holes as illustrated and transfer
them to the uncovered hole on the left
side.
6. Remove both adjustable feet and
remove the bottom hinge bracket by
unscrewing the screws.
www.zanussi.com
7. Unscrew and remove the bottom hinge
pin, turn the bracket over and replace it.
Refit the bracket fitting the bottom
hinge pin. Replace both adjustable feet.
Attach the lower door in the opposite
position. Secure the door's position, fit
the bottom hinge pin into the lower hole
in the door and tighten the screws.
8. Make the middle hinge reverse the
direction 180 degree, then transfer it to
the left property position. Make the
middle hinge pin in the upper hole of
the lower door, then tight the bolts.
Attach the lower door in the opposite
position. Secure the door's level; make
the middle hinge pin into the lower hole
of the upper door.
9. Refit the cover by fitting the upper hinge
pin into the upper hole in the door and
securing it with the four screws. Refit
the screw covers.
11