ITW Simco Ion Blowflex Easy Mode D'emploi page 39

5.6 Mounting the ionizer using the mounting bracket (slide bracket)
A mounting base is supplied with the ionizer on which the ionizer can be mounted in various
ways. The mounting base is provided with 2 side pieces, which are removable for narrow
mounting.
2
1
3
Afbeelding 5.3: Bevestiging met behulp van montagevoet
- Mount the mounting base (1) on the machine, use suitable M5 mounting material.
- Place the ionizer on the mounting base and slide it against the direction of the three points.
- Lock the ionizer (2) by tightening at least 1 of the two set screws (3) (there is an adjusting
screw on both sides).
- Connect the ionizer to the power cable and compressed air line.
BlowflexEasy_UM_9752161610_NL_D_GB_F_1.3 38