Installation; Control - ITW Simco Ion Blowflex Easy Mode D'emploi

Image 4.1: Dimensions Blowflex Easy

5 Installation

− The equipment must be voltage-free when any maintenance or repair works are carried out.
− Electrical installation must be done by a qualified electrician.
− The Blowflex Easy may only be used indoors and only for suitable light industrial
applications.
− Refer to the manual for the suitable power supply to be used for the correct and safe
connection of the ionization system.
− The power supply for the Blowlex Easy must be properly grounded. Grounding is necessary
for proper operation of the equipment and prevents electric shock when touched.
The 0 Volt of the power supply output must be properly grounded (see section 5.4).
The Blowflex Easy can be powered by an already available 24 Volt DC power supply at the
workplace (which meets the above requirements), and also by a separate SIMCO (Nederland)
B.V. Desktop power supply (see accessories).

5.1 Control

− Check that the equipment has been received undamaged and is the correct version.
− Check whether the accessories are also included.
− Check whether the packing slip data matches the data of the received product.
In case of problems or questions, please contact Simco Ion or a local Simco Ion
representative in your region.
BlowflexEasy_UM_9752161610_NL_D_GB_F_1.3 34