Publicité
Les langues disponibles
Les langues disponibles
■ "instax mini" Film and Print Care
See FUJIFILM Instant Film "instax mini" for film use
instructions. Follow all instructions for safe and proper use.
1. Keep the film in a cool place. Do not leave the film in a
place where the temperature is extremely high (e.g., in a
closed car) for many hours.
2. Do not puncture, tear, or cut "instax mini" film. If film
becomes damaged, do not use.
3. When you load a film pack, use the film as soon as possible.
4. If the film has been kept in a place where the
temperature is extremely high or low, bring it to room
temperature before starting to print pictures.
5. Be sure to use the film before the expiration or "Use
Before" date.
6. Avoid airport checked luggage inspection and other
strong X-ray illumination. The effect of fogging, etc. may
appear on unused film. We recommend that you carry
the camera and/or the film onto the aircraft as carry-on
luggage. (Check with each airport for more information.)
7. Avoid strong light, and keep the developed prints in a
cool and dry place.
8. Do not puncture or cut this film as it contains a small
amount of caustic paste (high alkaline). Never let
children or animals put the film into their mouth. Also
pay attention so that the paste does not come into
contact with skin or clothes.
9. In case the paste inside the film comes into contact
with skin or clothes, immediately wash off with plenty
of water. If the paste comes into contact with the eyes
or mouth, immediately wash the area with plenty of
water and contact a doctor. Note that the alkaline inside
the film remains active for about 10 minutes after the
picture has been printed.
■ Cautions on Handling the Film and Prints
For details, refer to the instructions and warnings on
FUJIFILM Instant Film "instax mini".
EN
9
Publicité
