Installation And Setup - Husky LIGNE CENTRALE FS Instructions De Montage, D'installation Et D'utilisation

Measure the Tow Vehicle
For vehicles with air springs, air shocks or automatic leveling systems only: Check vehicle owner's
manual or other instructions on these items. Unless otherwise indicated, air springs and air shocks
should be deflated to their minimum recommended pressure BEFORE assembling and adjusting the
weight distribution hitch. Pick reference points at the top center of the front and rear fender well of
towing vehicle. Measure and record the height to pavement here:
FRONT FENDER TO PAVEMENT:
REAR FENDER TO PAVEMENT:
ILLUSTRATION 3

Installation and Setup

NOTE: To obtain proper ball height on low ground clearance tow vehicles, shank may be oriented in the
"UPRIGHT POSTION" as shown in Illustration 4. If shank is used in the "INVERTED POSITION, check
shank for adequate ground clearance. Accessory shanks with greater height and length are available
from your dealer. IMPORTANT! Proper adjustment requires the use of the proper length shank
and proper head height.
ILLUSTRATION 4
All Products limited to Vehicle Tow Rating, see Vehicle Owners Manual. Visit www.huskytow.com for Warranty Information / Tech Support /
Product Updates. 2023 Keystone Automotive Operations Inc. All Rights Reserved. 2023-Rev4 Page-4