Husky LIGNE CENTRALE FS Instructions De Montage, D'installation Et D'utilisation page 16

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

31.
Raise the trailer tongue enough to ease the force required to lift the spring bar ends off the lift
brackets. Place the lift tool on the round peg on the forward side of the lift bracket and under the
end of the spring bar as shown. Start pushing down on the lift tool.
ILLUSTRATION 22
32.
Continue pushing down on the lift tool until it starts to come up and towards you.
IMPORTANT: Do not be in a rush here, stay in control of the tool.
ILLUSTRATION 23
33.
There will be a point where the spring bar will stop and come to a rest on top of the 2 round
pins on the lift bracket. Stop there and keep your hands away from the spring bar.
ILLUSTRATION 24
All Products limited to Vehicle Tow Rating, see Vehicle Owners Manual. Visit www.huskytow.com for Warranty Information / Tech Support /
Product Updates. 2023 Keystone Automotive Operations Inc. All Rights Reserved. 2023-Rev4
Looking from the rearward
side of the frame bracket.
Page-16

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

333103331133312

Table des Matières