34.
Remove the lift tool from under the spring bar and position it as shown below. Place the tip
of the tool against the side of the frame; somewhere on the frame bracket or even on the lift
bracket is fine. Then pull out on the handle (keeping hands away from the spring bar) until
the spring bar falls off the lift bracket completely.
ILLUSTRATION 25
WARNING
This Weight Distribution Hitch should be checked yearly for loose
fasteners or defects throughout the life of the hitch installation.
All Products limited to Vehicle Tow Rating, see Vehicle Owners Manual. Visit www.huskytow.com for Warranty Information / Tech Support /
Product Updates. 2023 Keystone Automotive Operations Inc. All Rights Reserved. 2023-Rev4
Page-17