Husky LIGNE CENTRALE FS Instructions De Montage, D'installation Et D'utilisation page 6

6. Align the bottom hole on the channel to the hole on the shank. Place a ¾" washer onto the ¾" hex
bolt. Then insert the bolt with washer through the bottom hole in the channel and through the
shank. Remember the hole and orientation in these instructions are an example only, yours
may be different.
ILLUSTRATION 7
¾" Washer and ¾" Hex Bolt
7. Place a ¾" washer onto the other ¾" hex bolt, then insert the bolt through the top hole in the
channel and through the shank.
ILLUSTRATION 8
¾" Washer and ¾" Hex Bolt
All Products limited to Vehicle Tow Rating, see Vehicle Owners Manual. Visit www.huskytow.com for Warranty Information / Tech Support /
Product Updates. 2023 Keystone Automotive Operations Inc. All Rights Reserved. 2023-Rev4 Page-6