Husky LIGNE CENTRALE FS Instructions De Montage, D'installation Et D'utilisation page 3

NOTE: Changing the weight of the trailer and/or tow vehicle by adding, moving or unloading cargo
may require the need to adjust how the weight distribution system is set up.
IMPORTANT! Set parking brake of tow vehicle and chock the wheels of the trailer before lifting or
1. Line up the tow vehicle and trailer on level pavement, in a straight position.
2. Use the trailer tongue jack to level the trailer. Measure the distance from pavement to the inside of
the coupler socket, and record here:_______________
3. Mark a spot on the side of the frame on the trailer as close to the coupler as you can. Measure from
this mark to the pavement, and record here: ______________. This measurement will be used later
to determine if a proper setup has been achieved.
All Products limited to Vehicle Tow Rating, see Vehicle Owners Manual. Visit www.huskytow.com for Warranty Information / Tech Support /
Product Updates. 2023 Keystone Automotive Operations Inc. All Rights Reserved. 2023-Rev4
Measure Trailer Coupler & Frame Height
lowering!
Page-3