Husky LIGNE CENTRALE FS Instructions De Montage, D'installation Et D'utilisation page 12

20. Insert lift bar into lift tool.
21. Insert M6 X 30mm hex head bolts into holes through handle assembly.
22. Place M6 flat washer onto hex bolts.
23. Place M6 lock washer onto M6 X 30 hex bolts.
24. Thread M6 hex nuts onto M6 X 30 hex bolts and finger tighten.
25. Tighten hex nuts until lock washer is flattened.
DO NOT OVER TIGHTEN OR USE AN IMPACT GUN.
ILLUSTRATION 18
All Products limited to Vehicle Tow Rating, see Vehicle Owners Manual. Visit www.huskytow.com for Warranty Information / Tech Support /
Product Updates. 2023 Keystone Automotive Operations Inc. All Rights Reserved. 2023-Rev4
Lift Tool Assembly
Page-12