Festo DGP B Série Notice D'utilisation page 26

DGP(L)−...−B
Work loads with their own guide (only DGP−... as cylinder; see chptr Application):
1. Make sure that there is a gap between the
slide and the work load.
Driver type FKP−... can be used for this
purpose.
2. Fasten driver type FKP to the driver of the
DGP−...:
for DGP−8/12/18−... as per Fig. 9.
for DGP−80−... as per Fig. 10 and Fig. 11.
for DGP−25/32/40/50/63 as per Fig. 12.
Fig. 12: DGP−25...63
26
Fig. 10: DGP−80 (1)
Fig. 9: DGP−8/12/18
FKP
Fig. 11: DGP−80 (2)
DGP−25/32: 4 Nm
DGP−40/50/63: 8 Nm
Festo DGP(L)−...−B 0407f English