Electrical Safety - Power Fist 9073925 Mode D'emploi

V1.0
12. Never use a tool with a sanding drum that is cracked or worn. Change the
sanding drum before using it.
13. Do not place the drum sander down until the sanding drum has stopped
moving. The drum sander may catch the surface of work material and
wrench itself free, causing injury to the user or others in the work area.
14. Never point the drum sander towards yourself. It could inflict an injury.

ELECTRICAL SAFETY

WARNING! Do not touch or handle a live tool with any part of your body
that is wet or damp. Wet skin reduces resistance to electrical current,
increasing the danger of a serious or fatal shock.
1. Do not alter any parts of the tool or accessories. All parts and accessories
are designed with built-in safety features that may be compromised if
altered.
2. Protect yourself against electric shocks when working on electrical
equipment. Avoid body contact with grounded surfaces. There is an
increased chance of electrical shock if your body is grounded.
3. Do not expose the drum sander to rain, snow, frost or any other damp
or wet conditions. Water entering a tool will increase the risk of electric
shock.
4. In the event of a power failure, turn off or unplug the machine as soon as
the power is interrupted. The possibility of accidental injury could occur if
the power returns and the unit is not switched off.
5. Make certain the power source conforms to requirements of your
equipment (see Specifications).
6. A polarized plug has two blades of different widths, allowing only one
way to insert the plug into the outlet. If the outlet does not accept a
polarized plug, contact a qualified electrician to install a polarized outlet.
Do not alter the plug, as this may compromise the built-in safety feature.
Page 7
VARIABLE-SPEED ELECTRIC DRUM SANDER/POLISHER
www.princessauto.com / 1-800-665-8685
9073925