9073925
WORK AREA
1.
Operate in a safe work environment. Keep your work area clean, well-lit
and free of distractions. Place lights so you are not working in a shadow.
2.
Keep anyone not wearing the appropriate safety equipment away from
the work area.
3.
Store unused tools properly in a dry, safe and secure location to prevent
rust, damage or misuse.
4.
Do not install or use in the presence of flammable gases, dust or liquids.
PERSONAL SAFETY
WARNING! Wear personal protective equipment approved by the
Canadian Standards Association (CSA) or American National Standards
Institute (ANSI).
PERSONAL PROTECTIVE EQUIPMENT
1.
Always wear impact safety goggles that provide front and side protection
for the eyes. Eye protection equipment should comply with CSA Z94.3-07
or ANSI Z87.1 standards based on the type of work performed.
2.
Wear protective clothing designed for the work environment and tool.
3.
Non-skid footwear is recommended to maintain footing and balance in the
work environment
4.
Wear the appropriate rated dust mask or respirator. Wear a NIOSH
approved respirator when working on materials that produce hazardous
fumes, dust or particulate matter.
a.
The dust generated while sanding certain wood species and wood
products can be injurious to your health. Always operate your sander
in a well ventilated area and provide for proper dust removal. Dust
collection systems should be used whenever possible. Splinters,
airborne debris and dust can cause irritation, injury, and/or illness.
PERSONAL PRECAUTIONS
Control the tool, personal movement and the work environment to avoid
personal injury or damage to tool.
1.
Do not operate any tool when tired or under the influence of drugs,
alcohol or medications.
www.princessauto.com / 1-800-665-8685
VARIABLE-SPEED ELECTRIC DRUM SANDER/POLISHER
V1.0
Page 4