Assembly And Installation; Charging The Battery; Switching The Cordless Magnetic; Cleaning And Storage - LIVARNO home 970-M Instructions D'utilisation Et Consignes De Sécurité

packaging material. Keep the packaging in
a safe place out of the reach of children.
There is a risk of suffocation if children are
allowed to play with packaging material.
z Assembly and installation
Please note: Dispose of all packaging
material.
Take the magnetic holder with the adhesive
„ „
pad and pull off the protective strip (see
8
Fig. C). Please mount the battery-powered
magnetic lights at a maximum distance of 8
cm to the drawer (see Fig. G) so that the
infrared sensor
7
Now stick the magnetic holder in the
„ „
desired position. To ensure good adhesion,
make sure the surface is flat, dry and free
of grease.
Fix the cordless magnetic
„ „
magnetic holder
8
integrated magnet
Fig. E).
Please note: Removing the adhesive pad
may cause damage to the surface in some
cases. We can accept no liability for such
damage. When the battery needs to be
recharged, the magnetic lamp can simply be
removed from the magnetic holder
Fig. E).
z Charging the battery
RISK OF ELECTRIC SHOCK!
The cordless magnetic lamps
should only be recharged in dry
indoor areas using an SELV mains adaptor.
Before using the cordless magnetic lamps
for the first time, please fully charge the
battery. To do so, use the USB charging
cable supplied (see Fig. D).
9
Plug the USB charging cable supplied
„ „
into the micro-USB socket
magnetic lamp (see Fig. F).
To charge the lamp, connect the USB
„ „
charging cable
9
42
GB/IE/NI/CY/MT
is activated.
lamp to the
1
with the aid of the
in the casing (see
4
(see
8
1
9
on the
5
to a USB mains adaptor
(5 V , max. 0.22 A).
Plug the USB mains adaptor into a power
„ „
outlet socket.
The charging time is approx. 2-3 hours. The
charge indicator
cordless magnetic lamp is fully charged. As
soon as the cordless magnetic lamp
fully charged, the charge indicator [6] shows
green. You can then unplug the USB mains
adaptor from the power outlet socket and
disconnect the USB charging cable
the cordless magnetic lamp
z Switching the cordless
magnetic lamps ON/OFF
The cordless magnetic lamps can be
„ „
switched on or off using the ON/OFF/
AUTO switch
The cordless magnetic lamps have two
„ „
functions: permanently on, and
automatically on for 120 seconds. For the
permanently on function, slide the ON/
OFF/AUTO switch
lamp to the ON position. Maximum
illumination time when fully charged:
approx. 3 hours. To switch on light when
the drawer is opened, turn the ON/OFF/
AUTO button on the side
position. Upon opening the drawer, the
light will come on for 120 seconds. Make
sure the infrared sensor
and the distance between the infrared
sensor and drawer is no larger than 8 cm.
To completely switch off the cordless
magnetic lamp, set the ON/OFF/AUTO
switch on the side of the lamp to the
3
centre, OFF, position.
1
z Cleaning and storage
RISK OF ELECTRIC SHOCK!
There is a risk of electric shock from
parts that carry electric current.
Unplug the USB mains adapter from the
power outlet socket before attempting to
remains red until the
6
9
(see Fig. F).
1
�
3
on the side of the
3
to the "AUTO"
3
is not covered
7
is
1
from