Connecting The Light With A Smartphone; Disconnecting The Smartphone; App Functions; The Following Modes Are Available Via App Control - LIVARNO home 14153905L Instructions De Montage, D'utilisation Et Consignes De Sécurité

... / Connecting the light with ... / App functions / Maintenance and cleaning
The light should now be flashing regularly in
learning mode.
Note: This procedure only resets the product to
offline mode and starts the learning mode.
If you want to remove all product and cloud data,
please refer to the section Disconnecting the remote
control and smart phone. Follow the instructions and
select "Disconnect and delete data" under "Remove
device".
Connecting the light with
a smartphone
Please consult the "Lidl Home" app for DETAILS of
our privacy policy.
1. Open the "Lidl Home" app.
2. Go to the "Home" tab
Select "+" (add device).
3. Choose the category "Lighting" and the desired
lighting type.
4. Select the gateway (only available when using
multiple gateways).
5. Now click "OK".
6. Go to "Confirm" whilst the LED floor lamp is
flashing.
7. Connect to the device.
8. Go to .
9. Go to "Device name". Enter a name and confirm.
10. Choose a room in order to specify the position
of the light. The selected room will now be
greyed out.
11. Click "Finish" to confirm.
12. The learning process is complete.
13. Click to return to the home screen.
<

Disconnecting the smartphone

1. Open the "Lidl Home" app.
2. Go to the "Home" tab
3. Choose one of the categories:
– ZigBee Gateway
– LED Floor Lamp
4. Go to .
5. Go to "Remove device".
18 GB/IE
.
.
6. Click "Confirm" to proceed. To remove all product
data from the cloud, select "Disconnect and
delete data".

App functions

Note: Make sure that you are always operating
the current version of the app on your smartphone.
Update the app if necessary.
Note: To use voice control, the light must be con-
nected online with the "Lidl Home" app and the
"Google Home" app.
The following modes are
available via app control
Switching on and off
– Remaining time: set timer
– : switch on and off
– Programme: create schedules to automati-
cally switch the lights on and
off at certain times
White
– Touch arc: adjust light colour from
2,000 K to 6,500 K
– Touch panel: adjust light intensity from
1 % to 100 %
Scene
– Night: warm, soft light
– Reading: neutral light
– Working: cold white light
– Leisure: bright, warm light
– Add a scene: to save custom-designed
lighting setups

Maintenance and cleaning

DANGER OF ELECTRIC
SHOCK!
First unplug the plug-in mains adapter
socket.
from the
8