DeWalt D26411 Traduction De La Notice D'instructions Originale page 20

EngLIsH
HEAT GUN
D26411, D26414
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.
Technical Data
Voltage
UK & Ireland
Type
Power input
Power input (115V)
Air temperature range (at nozzle)
Weight
nOtE: D26414, This device is intended for connection to
a power supply system with maximum permissible system
impedance Zmax of 0.088 Ω at the interface point (power
service box) of user's supply.
The user has to ensure that this device is connected only to a
power system which fulfils the requirement above. If necessary,
the user can ask the public power supply company for the
system impedance at the interface point.
EC-Declaration of Conformity
Machinery Directive
Heat Gun
D26411, D26414
D WALT declares that these products described under
e
Technical Data are in compliance with:
2006/42/EC, EN60335-1:2012+A11:2014, EN60335-2-45:2002
+A1:2008 +A2:2012.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact D
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
Markus Rompel
Vice President of Engineering, PTE-Europe
D WALT, Richard-Klinger-Straße 11,
e
65510, Idstein, Germany
01.10.2021
18
WALT one of the
e
D26411 D26414
V 220-240 220-240
AC
V 230/115 230/115
AC
1 1
W 1800 2000
W 1600 1600
ºC 50–400 and 50 –400 and
50–600 50–600
kg 0.65 0.71
WALT at
e
WALT.
e
DECLARATION OF CONFORMITY
THE SUPPLY OF MACHINERY (SAFETY)
REGULATIONS 2008
Heat Gun
D26411, D26414
D WALT declares that these products described under
e
Technical Data are in compliance with:
The Supply of Machinery (Safety) Regulations, 2008, S.I.
2008/1597 (as amended),
EN60335-1:2012+A11:2014, EN60335-2-45:2002 +A1:2008
+A2:2012.
These products conform to the following UK Regulations:
Electromagnetic Compatibility Regulations, 2016, S.I.2016/1091
(as amended).
The Restriction of the Use of Certain Hazardous Substances
in Electrical and Electronic Equipment Regulations 2012, S.I.
2012/3032 (as amended).
For more information, please contact D
address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
Karl Evans
Vice President Professional Power Tools EANZ GTS
D WALT UK, 270 Bath Road, Slough
e
Berkshire, SL1 4DX
England
01.10.2021
WARNING: To reduce the risk of injury, read the
instruction manual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.

DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.

WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.
WALT at the following
e
WALT.
e