Safety Precautions - PCE Chauvin Arnoux CA-E3N Mode D'emploi

Masquer les pouces

Table Des Matières

Table des Matières

Les langues disponibles

Thank you for purchasing a clamp. To get the best service from this instrument:

I read this user's manual carefully

I respect the safety precautions detailed

Meaning of the symbol

Warning ! Please refer to the User's Manual before using the instrument.

In this User's Manual, the instructions preceded by the above symbol, should they not be

carried out as shown, can result in a physical accident or damage the instrument and the

installations.

WEEE 2002/96/EC

Symbol 102 according to IEC 61010-2-032

(Application or withdrawal authorized on the drivers

UNDER DANGEROUS TENSION)

Our guarantee is applicable for twelve months after the date on which the equipment is

made available (extract from our General Conditions of Sale, available on request).

I Do not use the clamp on conductors in which the voltage is more than 600 V rms.

I Keep the jaw faces clean. Clean them if necessary with a lightly oiled soft cloth to prevent

rusting.

I Keep the cable or the busbar centred in the clamp which should be perpen-dicular to the

conductor.

I Avoid proximity to other conductors which may create fields of interference.

I The clamp must be totally disconnected in the OFF position when the battery is changed.

I For your safety, ensure that the instruments used with your clamp are also in accordance

with IEC 61010-1.

Clamp E3N

..............................................................................................................................................................

supplied with a 9V battery and an Operator's Manual

Spares:

9V alkaline battery

.............................................................................................................................................

ENGLISH

WARRANTY