Metrological Check - PCE Chauvin Arnoux CA-E3N Mode D'emploi

For maintenance, use only specified spare parts. The manufacturer will not be
held responsible for any accident occurring following a repair done other than
by its After Sales Service or approved repairers.
I Jaw faces : It is necessary to always keep the jaw faces clean. Clean them and lightly oil
them to avoid rust. Do not leave the clamp in very damp places, or directly exposed to
water.
I Handles and case : Clean with a cloth or a sponge soaked with soapy water, rinse in the
same way without ever getting water on the clamp. Dry with a cloth or in an air flow.
I To maintain the performance of the clamp, it is advisable to carry out a check or recali-
bration every year.

METROLOGICAL CHECK

Like all measuring or testing devices, the instrument must be checked regularly.
This instrument should be checked at least once a year. For checking and calibration, contact
one of our accredited metrology laboratories (information and contact details available on
request), at our Chauvin Arnoux subsidiary or the branch in your country.
REPAIRS
For all repairs before or after expiry of warranty, please return the device to your distributor.
MAINTENANCE
17