Jacuzzi J-400 Serie Manuel D'installation Et Utilisation & Entretien page 71

2.
3.
4.
Cleaning the Spa Interior
To preserve the sheen of your spa's surface, it is crucial that you avoid
using abrasive cleaners or cleaners which have adverse chemical effect
on the surface. Regardless of the cleanser used, use extreme care to
assure that no soap residue is left on the surface. This could cause
severe sudsing when the spa is refilled.
Information regarding spa cleaning and maintenance and
the products to be used can be found in the catalogue-guide
provided with the product.
Pillow Care
Clean the headrests in your spa as needed by wiping them with
a cloth with soapy water. It is not necessary to remove the head-
rests for cleaning. To remove headrests for long-term storage or
replacement, grasp both ends of each headrest and gently pull
inward towards the center of the spa. To reinstall, over mounting
strip and press down until headrest mounting bracket emits a
"click" sound.
N.B.: Always remove the headrests when adding a chemical shock treat-
ment to the water. The headrests can be put back in the hot tub when the
disinfectant product value reaches a normal level again (see the water
treatment guide).
Then adjust headrest height by simply moving up or down as
desired.
Maintaining the Synthetic Cabinet
The synthetic cabinet requires little or no maintenance of any
kind. To clean, simply wipe cabinet with mild detergent soap
solution and a clean towel.
Cleaning the Control Panel
To clean, simply wipe control panel with a micro-fiber cloth that
is used for cleaning polycarbonate lenses.
Vinyl Cover Care and Maintenance
Your Jacuzzi cover has a vinyl encasement. This vinyl encasement
is attractive and durable. Clean and treat the cover every month
to preserve it and prolong its life..
To Clean and Condition the Cover:
1. Use a garden hose to loosen debris and dirt.
5.
2. Using a large sponge or a soft bristle brush, use diluted or
mild soap and scrub the vinyl top. Rinse clean and do not allow
soap to dry on cover. Do not use soap on the underside of the
cover.
3. Please check with your Jacuzzi Dealer about purchasing
Jacuzzi's cover care and conditioning products. Condition using
non-petroleum based conditioners to keep the vinyl supple and
threads/stitching from drying out. Do not use solvents, abrasive
6.
cleaners or strong detergents. Do not use products that contain
silicone or alcohol.
Additional Care and Maintenance Instructions:
1. Debris can accumulate on the spa cover. Removal of snow or
other debris will help to avoid breakage of the foam cores.
2. Be sure to lock the cover straps to secure the cover from
unwanted or accidental entry.
3. Do not place heavy objects on the vinyl.
4. Do not walk, sit or stand on the cover.
5. Do not drag or use the flaps/skirt or the cover lock straps to
remove the cover.
6. Use only recommended cover lift systems.
7. Use only chemicals and cleaners recommended by Jacuzzi.
8. Remember to keep spa covered when not in use. Maintaining
proper water levels assures efficient operation and efficient elec-
trical usage.
9. Do not expose your spa to the sun for extended periods of
time as UV rays can damage the interior surface.
10. Use caution when removing cover. Before removing cover,
assure all locks have been released to avoid lock breakage and
or cover strap damage.
71
Never spray cabinet with a high pressure garden hose for
any reason since this action may induce an electrical
short in the spa's electrical equipment.