Amann Girrbach smartmix X2 Mode De Fonctionnement page 15

technical data:
Depth/Width/Height:
Weight:
Power supply:
Fuse:
Power uptake:
Mixing speed:
Vakuum:
Pump capacity:
accessories and single components:
Art.Nr.:
115730 Smartmix X2 stand
115620 Beaker with lid
and blade S, 100 ccm
115630 Beaker with lid
and blade S, 250 ccm
115640 Beaker with lid
and blade S, 500 ccm
115650 Beaker with lid
and blade S, 750 ccm
115660 Beaker with lid
and blade S, 1,000 ccm
115621 Replacement breaker, 100 ccm
115631 Replacement breaker, 250 ccm
115641 Replacement breaker, 500 ccm
115651 Replacement breaker, 750 ccm
115661 Replacement breaker, 1,000 ccm
115701 Spare filters Smartmix X2 (5 pces.)
Packing list:
Art.-Nr.
115700 Smartmix X2 unit
Beaker with stirring unit 500 ml,
power cable, pre-filter,
drilling stencil
250 x 160 x 350 mm
8,5 kg
115/230V - 50/60Hz
T 2,5A
210 W
Up to 550 r.p.m.
-800 mbar
15,8 l/min
o P e r at I n g I n s t r u c t I o n s
!
WarnIngs and
safety asPects:
The Smartmix X2 was developed for use in
dental laboratories. It must be installed and
operated as described in the user's manual. The
manu- f acturer is not liable for damage caused
by using the unit for other purposes or handling
it incorrectly.
In addition, if the intended application is not
listed in the user's manual, the user is obliged
to check personally in advance that the unit is
s uitable for this purpose.
_ do not clean the smartmix x2 with liquids
containing solvent
_ keep the lid and mixing beaker clean -
especially those parts which create the seal
_ do not run the vacuum pump too long
without connecting a mixing beaker
_ When releasing the vacuum, always hold
the mixing beaker with your hand
_ always operate the smartmix x2 with a
pre-filter!
gB
15