Installing The Indicator; Span Calibration - Tru-Test S3 Guide De Démarrage Rapide

Installing the indicator

3
Ensure the indicator is fully charged before use.
To install the load bars, refer to the manual that shipped with your load bars.

Span Calibration

If you are installing non Tru-Test load bars, you may need to perform a span calibration
to ensure that your animals are weighed correctly.
The S3 indicator is pre-calibrated to work with leading load bar brands. Check
the weigh accuracy of your load bars with a known weight before doing a
span calibration, as a span calibration may not be required.
6
1. Mount the indicator onto a post or
crush/chute using the mounting
bracket and mounting kit.
2. Plug the load bar cables into the
indicator, and secure the cables with
cable ties.
3. Power on the indicator.