Setting Up The Indicator; Charging The Battery - Tru-Test S3 Guide De Démarrage Rapide

Setting up the indicator

2
It is recommended that you set up the indicator at home before you begin weighing
animals.

Charging the battery

Fully charge the indicator overnight by plugging it into a computer or charging it with
a USB power adaptor, such as supplied with most mobile phones.
Setting unit weights
When you first power up the indicator, you will need to select whether you will be
weighing in kg or lb before you can begin weighing.
1. Press
2. Press
The unit you select will remain selected even after you power the indicator off and on
again. If you need to change the unit, hold down
between kg or lb.
The indicator is now ready to be installed.
2
to choose between the flashing kg or lb units.
to select the flashing unit you will use.
for 3 seconds to swap