Intended Use - ResMed Swift FX Bella Gray Mode D'emploi

English
Please read this information in conjunction with the Swift FX or the
Swift FX Bella Gray User Guide.

Intended use

The Swift FX Bella Gray channels airflow noninvasively to a patient
from a positive airway pressure (PAP) device such as a continuous
positive airway pressure (CPAP) or bilevel system.
The Swift FX Bella Gray is:
• to be used by adult patients (> 66 lb/30 kg) for whom positive
airway pressure has been prescribed
• intended for single-patient re-use in the home environment and
multipatient re-use in the hospital/institutional environment.
Attaching the headgear
First remove the current headgear from the pillows, then:
1. Hold the Swift FX Bella Gray buckle with the arrow facing
you. Latch the buckle onto the node on the pillows.
2. Repeat step 1 with the other buckle.
Fitting
1. Hold the pillows at your nose ensuring that the ResMed logo
is on the top of the pillows facing up. Pull one strap around
and behind your ear.
2. Ensure the strap lies flat and is not twisted.
3. Repeat steps 1 and 2 with the other strap.
4. Adjust the mask fit by pulling the upper straps along the
notches until a comfortable fit is achieved. Repeat with the
lower straps. Do not overtighten.
5. Check that the nasal pillows are positioned upright in the
entrance of your nostrils.
1