Intended Use - ResMed Mirage Activa LT Mode D'emploi

Mirage Activa™ LT
nasal mask
Thank you for choosing the Mirage Activa™ LT. The Mirage Activa LT is the first
in ResMed's ConvertAble™ Series—offering a choice of two high performance
cushions (Mirage Activa LT and Mirage SoftGel) on the one durable frame. For
further information, refer to the ConvertAble Series section in this User Guide.

Intended Use

The Mirage Activa LT channels airflow noninvasively to a patient from a positive
airway pressure device such as a continuous positive airway pressure (CPAP)
or bilevel system.
The Mirage Activa LT is:
• to be used by adult patients (>66 lb/30 kg) for whom positive airway
pressure has been prescribed
• intended for single-patient re-use in the home and multipatient re-use in
the hospital/institutional environment.
Using your mask
When using your mask with ResMed CPAP or bilevel devices that have mask
setting options, refer to the Technical specifications section in this user guide
for mask selection options.
For a full list of compatible devices for this mask, see the Mask/Device
Compatibility List on www.resmed.com on the Products page under Service
& Support. If you do not have internet access, please contact your ResMed
representative.
WARNING
• The vent holes must be kept clear.
•
Follow all precautions when using supplemental oxygen.
• Oxygen flow must be turned off when the flow generator is not
operating, so that unused oxygen does not accumulate within the flow
generator enclosure and create a risk of fire.
• At a fixed flow rate of supplemental oxygen flow, the inhaled oxygen
concentration varies, depending on the pressure settings, patient
breathing pattern, mask, point of application and leak rate.
1
Rx Only