Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
2. SECURITY
General security advice for battery operated riveting machines
1.
Workspace safety
a)
Keep your work space in a clean condition and provide sufficient lighting.
b)
Do not operate this machine in an environment with risk of explosions which
contains flammable liquids, gases or dust.
c)
Keep away children and other persons while operating this machine.
2.
Battery safety
Do not expose battery operated riveting machines to rain or humidity. Water entering
a battery operated riveting machine increases the risk of electric shock.
3.
People safety
a)
Stay alert, be careful with your actions and use this machine in a reasonable
way.
Do not use this machine if you are tired or under the influence of alcohol, drugs or
medication. A momentary inattentiveness while using this machine can lead to serious
injuries.
b)
Wear protective clothing and always wear protective goggles.
c)
Remove adjusting tools and screwdrivers before switching on the battery
riveting machine.
A tool or screwdriver placed into a rotating part of the device can lead to injuries.
d)
Avoid unnatural body positions.
Ensure you are standing firmly and always preserve your balance. This way you can
better control the battery riveting machine, should an unexpected situation occur.
e)
Wear appropriate clothes. Do not wear large clothes or jewelry.
Avoid putting your hair, clothes and gloves close to the moving parts of the device.
Wide clothing,long hair and jewelry can be caught up in the moving parts.
f)
If the mandrel collection devices can be mounted, make sure that they are
connected and used correctly.
4.
Operation and handling of this riveting machine
a)
Do not overload the machine.
Use the machine that is suitable for your work.The suitable riveting machine allows you
to work better and safer in the specified range of performance.
b)
Do not use a riveting machine that has a defect power switch. A riveting machine
which can not be turned on and off any more is dangerous and has to be repaired.
c)
Remove the battery before making adjustments to the device, changing
accessories or putting the device away.
This safety precaution prevents the inadvertent start of this machine.
d)
Store unused riveting machines out of the reach of children.
e)
Pay attention to the maintenance of this riveting machines.
Check if the moving parts are functioning flawlessly and do not jam. Check for broken
and damaged parts that could influence the operation of this riveting machine. Repair
the damaged parts before using the device. Many accidents with the riveting machines
stem from maintenance failures.
f)
Use this machine, accessories, tools etc. according to these instructions.
5.
Use and handling of the battery tools
a)
Only recharge the batteries in charging devices approved by the manufacturer.
There is a risk of fire when using a charging device designed for a specific battery type
when it is used with other batteries.
www.degometal.com
16
Publicité
Table des Matières
