Technical Data; General Information - Nordcap UKU 162 CHR Instructions Pour L'installation, L'emploi Et La Maintenance

EN
A.1 GENERAL INFORMATION
A.1.1 FOREWORD
This manual provides all the information necessary for correct
installation of the appliance. Therefore the manual and all the
technical documentation supplied must always be kept with the
appliance for possible consultation by technicians or users. It is
important to inform the appliance user regarding the regulations
on safety during and after installation.
Read the instructions in the manual carefully before carrying
out any operation on the appliance, as they provide important
information on safe installation and use. Incorrect installation,
adjustment, modification, assistance or maintenance can
cause damage, injury or risk of death. The manufacturer
declines any liability for operations carried out on the
appliance without following the instructions given in this
manual. The use of non-original par ts relieves the
manufacturer of all liability and invalidates any warranty.
No part of this manual may be reproduced.
A.1.2 INTENDED USE AND RESTRICTIONS
This appliance is designed for the refrigeration and preservation
of foods. Any other use is deemed improper. It must only be used
by adults. The appliance must not be used by people (including
children) with limited physical, sensory or mental abilities or
without experience and knowledge of it, unless instructed in its
use by those responsible for their safety.
ATTENTION:
The appliances are not suitable for installation outdoors and/or
in places exposed to atmospheric agents (rain, direct sunlight,
etc.).
The manufacturer declines any liability for improper use of
the products.
A.1.3 TESTING AND INSPECTION
Our appliances are designed and optimised, with laboratory
testing, in order to obtain high performance and efficiency. The
product is shipped ready for use.
Passing of the tests (visual inspection - electrical test - func-
tional test) is guaranteed and certified by means of the specific
enclosures (par. D.4).
A.1.4 GENERAL SAFETY STANDARDS
The appliance is manufactured in compliance with European
low-voltage Directives 2006/95/EC, electrical systems to
standards EN 60-335-1, EN 60-335-2-89 and electromagnetic
compatibility to standards EN 55014-1; EN 61000-6-1; EN
61000-6-3; 2004/08/EC; EN 55014-2, EN 50366.
Validity according to the latest current regulations.
A.1.5 CUSTOMER'S RESPONSIBILITIES
Provide an earthed power socket of suitable capacity for the
input specified on the dataplate. A suitable high-sensitivity
manual-reset differential omnipolar thermal-magnetic switch
with contact gap enabling complete disconnection in category
III overvoltage conditions and complying with the current regu-
lations, must be installed between the power cable and the
electric line. For the correct size of the switch, refer to the input
specified on the appliance dataplate. Check the flatness of the
surface on which the appliance is placed.
A.1.6 LOCATION OF DATAPLATE
The dataplate with all the appliance specifications is located at
the bottom left, inside the compartment. The plate giving the code
and serial number is located at the bottom, on the back of the
appliance.
A.2 TECHNICAL DATA
A.2.1 MATERIALS AND FLUIDS USED
The areas in contact with the product are in steel or coated with
non-toxic plastic material. An HFC refrigerant, in compliance with
the current regulations, is used in the refrigeration units. The type
of refrigerant gas used is given on the dataplate.
A.2.2 DIMENSIONS, PERFORMANCE AND CONSUMPTION
"V160" FREEZERS AND REFRIGERATED COUNTERS
External dimensions:
- width
- depth with door open
(fully insulated door)
- depth with door open
(glass door)
- depth with door closed
- height
Racks supplied:
Refrigerated counter rack dimensions:
- fixed rack on bottom
- adjustable racks
Freezer counter rack dimensions:
- structure with evaporating racks
(3 non-adjustable shelves+bottom)
Refrigerated counters with fully insulated door
Temp. range in compartment
Consumption at 43°C
Power supply voltage
Current
Electric power
Qty refrigerant (R134a)
Noise level
Freezer counters
Temp. range in compartment
Consumption at 43°C
(undercounter operation)
Power supply voltage
Current
Electric power
Qty refrigerant (R134a)
Noise level
A.2.3 MECHANICAL SAFETY CHARACTERISTICS,
HAZARDS
The appliance does not have sharp edges or protruding parts.
The guards for moving and live parts are screwed on the cabinet,
to prevent accidental access.
A.2.4 CLIMATIC CLASS
The climatic class given on the dataplate refers to the following
values:
• for fully insulated door models
CLIMATIC CLASS: 5
43°C (EN 60335-2-89)
40°C room with 40% relative humidity (EN ISO 23953).
• for glass door models
CLIMATIC CLASS: 4
32°C (EN 60335-2-89)
30°C room temperature with 55% relative humidity
(EN ISO 23953).
17
Refrigerated Freezer
mm 597 mm
mm 1155 mm 1170
mm 1147
mm 637 mm
mm 850 mm
no.
mm 175x475 (1)
mm 410x527 (2)
mm 396x477 (1)
°C
kwh/24h
V/ph/Hz 230/1/50
A
W
g.
dBA
°C
kwh/24h
V/ph/Hz 230/1/50
A
W
g.
dBA
597
625
825
2+1
+2/+10
3.9
1.3
163
55
45
-20/-15
2.3
1.28
124
110
45