HOMCOM A90-263 Manuel D'assemblage Et D'instructions page 11

Assembly Instructions
Carefully follow all the assembly steps as explained on this manual. Please refer to the
illustrations in order to assemble all parts correctly.
Step 1:
Step 2:
Step 3:
Place the base machine on a fl at surface.
Insert Cable B into the lower tube, and
connect Cable A and B together,
and then insert the lower tube into the
base machine and fasten with a bolt, as
shown on the left.
Pull Cable B through the upper tube,which is
then fastened to the lower tube with a bolt, as
shown on the left.
Pull Connector C through the meter holder of the
upper tube. Fix and fasten the handle to the upper
tube with a bolt and then put on the cover, as
shown on the left.
11