OHAUS Pioneer PX Serie Manuel D'instruction page 38

Use the built-in RS-232 Port to connect either to a computer or a printer.
If connecting to a computer, use HyperTerminal or similar software like SPDC
described below.
(Find HyperTerminal under
Connect to the computer with a standard (straight-through) serial cable.
Choose
Select
Choose Properties/Settings, then ASCII Setup. Check boxes as illustrated:
(
Use RS232 Interface Commands (Section 9.6.1) to control the balance from a PC.
The Serial Port Data Collection / SPDC software is provided by Ohaus and can be used on operating systems that
do not have the HyperTerminal software mentioned above. SPDC software can preliminarily collect and transfer
the data to Microsoft files (such as Excel, Word, etc.).
Choose the export file type and export file path and then press Run as shown below.
The latest SPDC software support English and Chinese language and can be downloaded from the Ohaus'
website. For more information, refer to the SPDC Data Collection Instruction Manual.
1.888.610.7664
, "connect using" COM1 (or available COM port).
; ; ;
;
www.calcert.com
15
10 20
5 25
0 30
in Windows XP.)
. Click
; )
.
sales@calcert.com