OHAUS Pioneer PX Serie Manuel D'instruction page 34

7-NO-2
7-ODD-1
7-ODD-2
Set the flow control method.
Xon-Xoff
Hardware
Enter this sub-menu to customize data transfer settings.
On = values are printed only when the stability criteria are met.
On = Only numeric data values are printed.
On = Headers will be printed once a day.
Printer = print data to a printer
On Stability
Print Interval
Continuous
1
When On Stability is selected, set the conditions for printing.
Load and Zero = Prints when the displayed load and zero readings are stable.
2
When Print Interval is selected, set the time interval using the numeric keypad.
Settings of 1 to 3600 seconds are available. Default is 0.
Off = the header is not printed.
Off = neither the date nor the time is printed.
1.888.610.7664
= 7 data bits, no parity, stop bit 2
= 7 data bits, odd parity, stop bit 1
= 7 data bits, odd parity, stop bit 2
= XON/XOFF handshaking
= hardware handshaking
1
= printing occurs each time the stability criteria are met.
2
= printing occurs at the defined time interval.
= printing occurs continuously.
www.calcert.com
15
10 20
5 25
0 30
sales@calcert.com