OHAUS Pioneer PX Serie Manuel D'instruction page 24

Ensure the balance has been leveled and calibrated.
The PX balance is equipped with a weigh below hook for weighing below the balance (as shown in the figure
below).
Before turning the balance over, remove the pan and draft shield elements (if present) to prevent damage. Do not
place the balance on the pan support cone or load cell pins.
To use this feature, remove power from the balance, then remove the protective cover for the weigh below
opening.
Power on the balance, and then use a string or wire to attach items to be weighed.
1.888.610.7664
Weigh Below
protective cover
www.calcert.com
15
10 20
5 25
0 30
Weigh Below hook
sales@calcert.com