Set-Up; Connecting The Printer Cable - Kyocera KM-6330 Mode D'emploi

2. Set-up

2-1 Connecting the printer cable

To connect the printer directly to your computer, use either a parallel
cable or serial cable.
CAUTION: ALWAYS turn the main switch to the printer OFF (O)
BEFORE connecting the printer cable.
1 Turn the main switch located on the left side of the printer
OFF (O) and then turn the power off to your computer as
well.
2
Connect the printer cable to the parallel interface connector
or serial interface connector located at the back of the right
side of the printer.
4
All manuals and user guides at all-guides.com
3 Connect the other end of the printer cable to the parallel
interface connector or serial interface connector on your
computer.
4 Turn the main switch to the printer back ON ( | ).
* For details on printer interface setup, see "Functions
Edition".