Acid Demand - Lovibond Tintometer Mode D'emploi

2.7.2 Acid demand

This sub-module enables the user to calculate the quantity of acid needed to
reduce the pH of the pool water to a certain value using the commonly named
"acid demand" method.
It converts the result obtained from using an acid demand test kit, expressed in a
number of drops, into a quantity of a given (preselected) acid.
The user may select any acid product in a drop-down list that has been defined
as a pH reducer in the "Product configuration" module.
Whenever the quantity of acid to be dosed is deemed to high to be dosed in one
time, this quantity will be sub-devised into smaller doses to be added at a given
time interval.
32 Aqua MATE_2 08/2015