The Modules; Printing ("Print" Button); General Configuration - Lovibond Tintometer Mode D'emploi

2

The modules

2.1 Printing ("Print" button)

Pressing the "Print" button will open a menu in which the print options are
displayed, whenever available.
Print options are available for the "General configuration", "Product configura-
tion", "Customer file", "Water balance" modules as well as in "Handy tools" for
the available sub-modules.
In order to save any printable documents on the computer, it is recommended to
choose a PDF creator as printer in the print menu.

2.2 General configuration

This module allows the user to:
a) Select a language for the software
b) Enter company data to appear as a header on printed documents,
with preview capability.
c) Make a choice of primary and secondary (optional) units to be displayed on
the screen and printed documents.
d) Enter an optional standard location in order to avoid unnecessary typing
when adding a new customer.
e) Enter additional titles that may be used with customer names.
f) Modify the time span in minutes within which individual water test results for
a specific pool are considered to belong to the same test series.
g) Change the baud rate of data transmission from the photometer into the PC.
A baud rate of 9600 is recommended.
h) Set parameter boundaries for chlorine and bromine treated swimming pools
per category. The categories are "private pools", "residential pools", "hotel,
school, camp, vacation resort pools" and "public pools". The parameters
boundaries concern free or available chlorine, combined chlorine, total
bromine, pH and cyanuric acid.
22 Aqua MATE_2 08/2015