Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Installations for instructions
3.6. Installing the glass door
Screw the two door fittings onto the glass element, making sure that they are
straight and that the doors open outward.
The bottom drill hole of the door handle is 92.4 cm high.
The alignment of the fittings is achieved by adjusting / rotating both
plastic inserts.
3.7. Installing accessories
The door handles are screwed together from the inside.
Install the door magnet and sleeve plate.
Install the roof cover slats and the roof trim slats on the outside.
p. 12/12
Publicité
Table des Matières
