Assembling The Floor; Installing Interior Fittings; Mounting The Inner Door; Installing Accessories - Sentiotec LAVA Instructions De Montage

Assembly instructions

3.11. Assembling the floor

Place the floor boards on the floor frame and fasten them to the floor frame.
Make sure that there is 5 mm gap to the walls to allow the wood to expand
and contract as the temperature changes.
Shorten the skirting boards to the correct size and fasten them to the block
planks - not to the floor boards!

3.12. Installing interior fittings

Mount the ventilation slide.
Assemble the bench support ledges as illustrated.
First put in the upper benches and screw them together.
Place the lower bench on the support ledges.
Fasten the bench screen and backrests as illustrated.

3.13. Mounting the inner door

First mount the edge boards on the door frame (lobby side). Place the inner door
into the door opening from the lobby side and fix it by fitting the door panel of
the sauna interior.

3.14. Installing accessories

Assemble the light and lamp protection grilles.
Assemble the protection grille.
Assemble the outer ventilation grille.
p. 10/10