Section
Initial Settings
10
Switching the warning tone
If the front panel is not detached from the head
unit within five seconds of turning off the igni-
tion, a warning tone will sound. You can turn off
this warning tone.
1 Press
to select
F
Press
repeatedly until
F
display.
• Pressing
FUNCTION
performs the same operation.
2 Select
WARN
Pressing E or e will switch
on and off and that status will be displayed (e.g.,
).
Warning :ON
• Pressing 5 or ∞ on the head unit also per-
forms the same operation.
Switching the auxiliary setting
It is possible to use auxiliary equipment with
this unit. Activate the auxiliary setting when
using auxiliary equipment connected to this
unit.
1 Press
to select
F
Press
repeatedly until
F
display.
• Pressing
FUNCTION
performs the same operation.
74
En
.
WARN
appears in the
Warning
on the head unit also
on or off with E or e.
between
Warning
.
AUX
appears in the
AUX
on the head unit also
on or off with E or e.
2 Select
AUX
Pressing E or e will switch
and off and that status will be displayed (e.g.,
).
AUX :ON
• Pressing 5 or ∞ on the head unit also per-
forms the same operation.
Switching the dimmer setting
To prevent the display from being too bright at
night, the display is automatically dimmed
when the car's headlights are turned on. You
can switch dimmer on or off.
1 Press
to select
F
DIM
Press
repeatedly until
F
display.
• Pressing
FUNCTION
performs the same operation.
on or off with E or e.
2 Select
DIM
Pressing E or e will switch
on and off and that status will be displayed (e.g.,
).
Dimmer :ON
• Pressing 5 or ∞ on the head unit also per-
forms the same operation.
Selecting the brightness
You can select the display brightness. Initially
this mode is set to 12.
1 Press
to select
F
BRIGHT
Press
repeatedly until
F
the display.
• Pressing
FUNCTION
performs the same operation.
between on
AUX
.
appears in the
Dimmer
on the head unit also
between
Dimmer
.
appears in
Brightness
on the head unit also