Fine Adjusting Equalizer Curve; Adjusting Bass - Pioneer DVH-P7000 Mode D'emploi

Audio Adjustments

Fine adjusting equalizer curve

You can adjust the center frequency and the Q
factor (curve characteristics) of each currently
selected curve band (
EQ Low/EQ Mid/EQ High
Level (dB)
Center frequency
1 Press and hold unitil frequency and the
A
Q factor (e.g.,
F 80 Q 1W
play.
• Pressing and holding
also performs the same operation.
2 Press to select the desired band for
A
adjustment.
Low—Mid—High
• Pressing on the head unit also per-
AUDIO
forms the same operation.
3 Select the desired frequency with
1 or ¡.
Press 1 or ¡ until the desired frequency
appears in the display.
Low — — —
: 40 80 100 160
Mid — — —
: 200 500 1 k 2 k
High —
: 3.15 k—8 k 10 k
• Pressing 2 or 3 on the head unit also per-
forms the same operation.
Q=2W
Q=2N
Frequency (Hz)
) appears in the dis-
on the head unit
AUDIO
(Hz)
(Hz)
— (Hz)
12.5 k
4 Press E or e to select the desired Q
factor.
Press E or e until the desired Q factor
appears in the display.
).
— — —
2 N 1 N 1 W
• Pressing 5 or ∞ on the head unit also per-
forms the same operation.
Note
• If you make adjustments when a curve other
than
CUSTOM2
is updated.

Adjusting bass

You can adjust the cut-off frequency and the
bass level.
• In mode, bass adjustment affects only
FRT1
the rear output: front output cannot be
adjusted.
1 Press to select
A
Press until
A Bass
• Pressing
AUDIO
forms the same operation.
2 Select the desired frequency with 1 or
¡.
Press 1 or ¡ until the desired frequency
appears in the display.
— — —
40 63 100 160
• Pressing 2 or 3 on the head unit also per-
forms the same operation.
3 Press E or e to adjust the bass level.
Each press of E or e increases or decreases
the bass level.
+6
increased or decreased.
• Pressing 5 or ∞ on the head unit also per-
forms the same operation.
2 W
is selected,
CUSTOM1
.
Bass
appears in the display.
on the head unit also per-
(Hz)
– is displayed as the level is
–6
Section
08
curve
En 59