Setup; Prerequisites; Attach The Printer To The Network - Lexmark MarkNet N2000 Serie Démarrage Rapide

Setup

Prerequisites

You may have purchased a printer that has Ethernet, Token-Ring or other
network ports preinstalled. If not, you should install a MarkNet™ internal print
server now. Refer to your printer documentation for instructions on opening
the printer and plugging in the card.
1

Attach the printer to the network

a
Turn printer power off. Unplug the power cord.
b
Plug the network cable into the network port.
c
Plug the power cord in and turn the printer power on.
2
MarkNet internal print
servers are sometimes called
internal network adapters or
INAs.
Connect only one network
cable even if the MarkNet
print server has more than one
network port.
You never have to worry about
setting the network speed on a
MarkNet print server. For
example, the MarkNet 10/100
Ethernet card automatically
senses if your network is 10
Mbps or 100 Mbps and
adjusts itself for that speed.
Some MarkNet print servers
have additional ports that are
used for other functions such
as copying or faxing. These
functions are outside the scope
of this book.