Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
10.2006
3
Transport, Storage, Unpacking
Transport
Storage
CAUTION
Unpacking
Siemens AG
6SE7087-7KN50
SIMOVERT MASTERDRIVES
The units and components are packed in the manufacturing plant
corresponding to that specified when ordered. A packing label is
located on the outside of the packaging. Please observe the
instructions on the packaging for transport, storage and professional
handling.
Vibrations and jolts must be avoided during transport. If the unit is
damaged, you must inform your shipping company immediately.
The units and components must be stored in clean, dry rooms.
Temperatures between -25 °C (-13 °F) and +70 °C (158 °F) are
permissible. Temperature fluctuations must not be more than 30 K per
hour.
If the storage period of one year is exceeded, the unit must be newly
formed. See Section "Forming".
The packaging comprises a wooden base, board and corrugated paper.
It can be disposed of corresponding to the appropriate local regulations.
After the consignment has been unpacked and checked to ensure that
everything is complete and not damaged, the units and components
can be installed and commissioned. Depending on the degree of
protection and type of construction, the units are mounted on a pallet
either with or without transport rails.
Type of
Pallet
construction
E, F, G, J, K, L
One unit per type of construction
Operating Instructions
Transport, Storage, Unpacking
3-1
Publicité
Chapitres
Table des Matières
