Patek Philippe Geneve Mode D'emploi page 5

Settings
PREPARATIONS PRIOR TO SETTING
6 4
SETTING THE CALENDAR DISPLAYS
D A B
1 2
6 4
SETTING THE MOON PHASE
C
3
8
7
• Before performing any corrections or settings,
always wind the watch (20 turns of the winding crown).
• Pull the crown (8) out.
• Advance the hands clockwise until the day-of-week
hand (6) and the date hand (4) switch forward by one day.
• Set the hands to 7 am.
• Push the winding crown (7) home again.
• Actuate the correction push piece (A) as many times as
needed to align the date hand (4) with the current date.
• Actuate the correction push piece (B) as many times as
needed to indicate the correct year (1) (2021 = I ;
2022 = II ; 2023 = III ; 2024 = leap year IV) and then
the current month (2).
• Actuate the correction push piece (D) as many times as
needed to display the current day of the week (6).
• Actuate the correction push piece (C) as many times as
needed to display the full moon in the moon-phase
aperture (3).
• Consult an almanac or visit www.patek.com find out how
many days have elapsed since the last full moon and
actuate the correction push piece that many times
(without the day of the last full moon).