Kärcher IVC 60/30 Ap M Z22 Mode D'emploi page 18

Do not use the appliance without the
–
complete filtering system.
Please follow the safety regulations ap-
–
plicable to the materials that are to be
treated.
The accessories approved by the man-
–
ufacturer are electrically conductive. Do
not use any other accessories!
Vacuum only using all the filter ele-
–
ments; otherwise, the suction motor can
get damaged and this can be hazard-
ous to health on account of increased
release of fine dust particles!
Please follow the safety regulations ap-
–
plicable to the materials to be sucked in.
During proper/improper operation parts
of the appliance can reach tempera-
tures of up to 125 °C.
You are not allowed to use an extension
–
cable.
Warning
Do not vacuum without the filter elements;
otherwise, the suction motor can get dam-
aged and this can be hazardous to health
on account of increased release of fine dust
particles.
Note: Additional regulations can be appli-
cable to dusts with an ignition capacity be-
low 1mJ.
 Bring the appliance to working position
- secure it, if required, with parking
brakes.
 Insert the suction hose (not included)
into the suction hose connection.
 Check the fill level in the dirt container
prior to starting work and empty the
container if necessary.
 Ensure that the dirt container has been
inserted properly. Spring bows must be
clean and lie flat against the dirt con-
tainer. Clean spring bow with a moist
cloth, as necessary.
 Attach the desired accessories (not in-
cluded).
18
Start up
Automatic monitoring of suction
The machine is equipped with a suction
power monitor. The control lamp "Vacuum
pressure" lights up red if the air speed in the
suction hose falls below 20 m/s (see "As-
sistance in case of malfunctions").
Note: The control lamp "negative pressure"
can occasionally light up red during normal
operation (e.g., while working with a floor
nozzle), if the air volume comes down
(cross-sectional reduction) causing a lower
pressure.
Note: There is no defect in this case; only
an indication that, as specified above, the
air volume has reduced and the low pres-
sure has increased.
Anti-static system
Static charge is deflected by providing
earthing to the connection nozzles. This
way, the electrically conductive accesso-
ries approved by the manufacturer prevent
the formation of sparks and current surges.
Caution
Risk of damage! Do not cover the supply
and exhaust air openings on the suction
head.
Caution
The two flat fold filters must never be re-
moved during vacuuming.
Close the suction connection
Warning
Health risk on account of fine dust! If the
suction hose is removed, the suction con-
nection must be closed.
Illustration
 Properly insert the connection socket in
the suction connection.
 Push in the connection socket until it
locks into place.
– 3
EN
capacity
Operation