Toro PowerMax Heavy Duty 1028 OHXE Manuel De L'utilisateur page 18

WARNING
If the auger and impeller continue
to rotate when you release the
auger/impeller lever, you could seriously
injure yourself or others.
Do not operate the machine. Take it to an
Authorized Service Dealer for service.
Operating the Quick Stick®
Hold the blue trigger cap down to use the Quick Stick
to move the discharge chute and the chute deflector.
Release the trigger cap to lock the discharge chute
and chute deflector into position
Figure 27
Moving the Discharge Chute
Hold the blue trigger cap down and move the Quick
Stick to the left to move the discharge chute to the
left; move the Quick Stick to the right to move the
discharge chute to the right
Figure 28
(Figure 27).
g001014
(Figure 28).
g322957
•
If the chute does not move, refer to
Adjusting the Auger/Impeller Cable (page
•
If the chute does not turn as far to the left as it
does to the right, ensure that the cable is routed to
the inside of the handles. Refer to
Upper Handle (page
•
If the chute does not lock into place when you
release the trigger cap, refer to
Adjusting the Auger/Impeller Cable (page
Moving the Chute Deflector
Hold the blue trigger cap down and move the Quick
Stick forward to lower the chute deflector; move it
rearward to raise the chute deflector
16
Checking and
1 Installing the
5).
Checking and
(Figure 29).
Figure 29
22).
22).
g001016