SystemAir ZRS Mode D'emploi page 2

GB
Manufacturer
Our products are manufactured in compliance with applicable international standards and regulations.
Systemair AB
Industrivägen 3
SE-73930 Skinnskatteberg SWEDEN
Office: +46 222 440 00 Fax: +46 222 440 99
www.systemair.com
The manufacturer hereby confirms that the following products:
Smoke gas fan ZRS
(The declaration applies only to product in the condition it was delivered in and installed in the facility in
accordance with the included installation instructions. The insurance does not cover components that are
added or actions carried out subsequently on the product)
Comply with all applicable requirements in the following directives
 Machinery Directive 2006/42/EC
 Low Voltage Directive 2006/95/EC
 EMC Directive 2004/108/EC
 RoHS2 Directive 2011/65/EC
The following harmonized standards are applied in applicable parts:
EN ISO 12100:2010
EN 14121-1:2007
EN 13857
EN 60 335-1
EN 60 335-2-80
EN 50 106:2007
EN 60 034-5
EN 60 204-1
EN 61000-6-2
EN 61000-6-3
Skinnskattberg 26-11-2012
Mats Sándor
Technical Director
_________________________________________________________________________________________________________
ZRS
200515
Safety of machinery – Basic concepts, general principles for design – Risk
assessment and risk reduction
Safety of machinery – Risk assessment – Part 1: Principles
Safety of machinery – Safety distances to prevent hazard zones being
by upper or lower limbs
Household and similar electrical appliances – Safety Part 1: General requirements
Household and similar electrical appliances – Safety – Part 2-80: Particular
requirements for fans
Safety of household and similar appliances – Particular rules for routine tests
referring to appliances under the scope of EN 60 335-1 and EN 60967
Rotating electrical machines – Part 5: Degrees of protection provided by the
integral design of rotating electrical machines (IP code)
Safety of machinery – Electrical equipment of machines – Part 1: General
requirements
Electromagnetic compatibility (EMC) – Part 6-2: Generic standards – Immunity for
industrial environments
Electromagnetic compatibility (EMC) – Part 6-3: Generic standards – Emission
standards for residential, commercial and light-industrial environments
2
reached
Installation instructions
Systemair AB