Maintenance And Storage - Ribimex TSP-101BO RK-4013 Manuel D'instructions Et D'utilisation

V. OPERATION
5.1- Intended use
This product is intended for household indoor use in transferring clean non-drinking water and
low voscity liquids.
Below liquids are unauthorized with this product:
Unauthorized liquids
Petrol, leaded or unleaded gasoline
Detergents, Solvents, bleach
Highly Flammable liquids
Food liquids
Liquids with viscosity > 10 cSt
Corrosive liquids
5.2- Operation
•
Check the pump and make sure all connections are secured and no damage found.
•
Insert the Suction Tube (6) as far as possible into the liquid to be transfered.
•
Place the Delivery Hose (15) into the receiving container (not included). The position of the
receiving container should be lower than the Battery Housing (3).
•
Switch the Power Switch (1) to ON position.
•
When the transfer is complete, switch the Power Switch (1) to OFF position. Always keep
the pump upright.
VI. MAINTENANCE AND STORAGE
WARNING!
Before any intervention on product, disconnect from power source.
Reminder: In order to maintain the tool in good working condition, carry out regular maintenance
after each use and before storage. Any breach or inadequate maintenance reduces the life of the
machine and increases the risk of breakdowns and accidents
6.1- Cleaning
•
Before cleaning, remove the batteries from the tool.
•
Clean the exterior plastic parts with a soft and clean cloth.
•
In case of necessary, use soft brush and mild detergent to assist cleaning.
•
Never immerse the tool in water or any liquid, and ensure that water does not penetrate the
product.
•
Never splash with water or clean with high pressure hose.
WARNING!
Do not use harsh chemicals, cleaning solvents or strong detergents for cleaning the
non-metallic parts of the product. They may weaken the plastic materials.
Potential hazards
Fire / Explosion / Pump damage
Fire / Explosion / Pump damage
Fire / Explosion / Pump damage
Contamination of the liquid
Motor overload
Pump damage / Personal injury
Page 9 / 16