Atlas Copco TEX 140PS Prescriptions De Sécurité Et Instructions Pour L'opérateur page 14

Safety and operating instructions
Air inlet
A.
B. Lubricator
Oil plug
C.
Handle
D.
E. Silencer
Trigger (start and stop device)
F.
G. Tool retainer
Cylinder
H.
Labels
The machine is fitted with labels containing important
information about personal safety and machine
maintenance. The labels shall be in such condition
that they are easy to read. New labels can be ordered
from the spare parts list.
Data plate
A. Machine type
Maximum permitted compressed air pressure
B.
Serial number
C.
D. The warning symbol together with the book
symbol means that the user must read the
safety and operating instructions before the
machine is used for the first time.
The CE symbol means that the machine is
E.
EC-approved. See the EC declaration which
is delivered with the machine for more
information. If the CE symbol is missing, it
means that the machine is not EC-approved.
14
TEX 140PS, 150PE, 180PS, 190PE, 220PS, 230PE,
Noise level label
The label indicates the guaranteed noise level
corresponding to EC-directive 2000/14/EC. See
"Technical data" for accurate noise level.
Safety label
To avoid injury, before using or servicing tool, read
and understand separately provided safety
instructions.
Installation
Hoses and connections
Compressed air source
A.
Water separator (optional)
B.
C. Lubricator (optional)
Max. 3 meter compressed air hose between
D.
the lubricator and the machine.
Check that you are using the correct
♦
recommended operating pressure, 6 bar (e).
The maximum permissible air pressure, 7 bar (e),
♦
must not be exceeded.
Blow any impurities out of the compressed air hose
♦
before connecting it to the machine.
© 2010 Atlas Copco Construction Tools AB | No. 9800 0683 90d | 2010-01-01
270PS, 280PE
Original instructions