Soundcore Liberty Air 2 Mode D'emploi page 3

To pair with another Bluetooth device, place the earbuds back into the charging case and
make sure they are being charged, keep the cover open, then press and hold the button on
the bottom of the charging case for 3 seconds until the LED indicators on earbuds flash white
rapidly.
1
• Each time you power on your Soundcore earphones, it will automatically connect to your
last successfully connected device if available within the Bluetooth range.
• Mono mode: When Bluetooth connected, you can use either one of the earbuds only by
putting the other one back into the charging case and closing the cover.
Wearing
1. Choose the EarTips that fit your ears best.
2. Insert the earbuds into the inner canal of your ears.
3. Turn and find the most comfortable position.
Controls
All of the controls in stereo mode can be customized in the Soundcore App.
Play / Pause
2
R
Next track
2
L
03 EN
2
Soundcore
Liberty Air 2
Soundcore
3"
Liberty Air 2
Tap twice (R)
Tap twice (L)
Volume up / down
1
R
Answer / End a call
2
L/R
Reject a call
2"
L/R
Voice Assistant
Activate Siri or other voice
assistant software
L/R
Mono mode (controls in mono mode cannot be customized in the App)
Play / Pause
Answer / End a call
Reject a call
Activate Siri or other voice assistant software
Soundcore App
Make sure the earbuds firmware is always up-to-date before using.
Download the Soundcore App for HearID, UI customization, EQ settings, and earbuds
firmware update.
• HearID: HearID maps your personal hearing sensitivity at multiple frequencies and analyzes
the results. It tailors the EQ settings and creates a personalized sound profile for you.
• UI customization: In stereo mode, all of the controls can be customized in the App. In
mono mode, the controls are fixed.
• EQ settings: There're more than 20 EQ settings you can choose in the App to optimize
your experience while enjoying different music genres.
Tap once
1
L
Tap twice (L/R)
Tap and hold for 2 seconds (L/R)
Tap and hold for 2 seconds (L/R)
2"
Tap twice
Tap and hold for 2 seconds
EN 04