DeWalt XR LI-ION DCD710 Traduction De La Notice D'instructions Originale page 8

Masquer les pouces Voir aussi pour XR LI-ION DCD710:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

ENGLISH
b) Use personal protective equipment. Always
wear eye protection. Protective equipment
such as dust mask, non-skid safety shoes,
hard hat, or hearing protection used for
appropriate conditions will reduce personal
injuries.
c) Prevent unintentional starting. Ensure the
switch is in the off position before
connecting to power source and/or battery
pack, picking up or carrying the tool.
Carrying power tools with your finger on the
switch or energising power tools that have the
switch on invites accidents.
d) Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key
left attached to a rotating part of the power
tool may result in personal injury.
e) Do not overreach. Keep proper footing and
balance at all times. This enables better
control of the power tool in unexpected
situations.
f) Dress properly. Do not wear loose clothing
or jewellery. Keep your hair, clothing and
gloves away from moving parts. Loose
clothes, jewellery or long hair can be caught in
moving parts.
g) If devices are provided for the connection of
dust extraction and collection facilities,
ensure these are connected and properly
used. Use of dust collection can reduce
dust-related hazards.
4) POWER TOOL USE AND CARE
a) Do not force the power tool. Use the correct
power tool for your application. The correct
power tool will do the job better and safer at
the rate for which it was designed.
b) Do not use the power tool if the switch does
not turn it on and off. Any power tool that
cannot be controlled with the switch is
dangerous and must be repaired.
c) Disconnect the plug from the power source
and/or the battery pack from the power tool
before making any adjustments, changing
accessories, or storing power tools. Such
preventive safety measures reduce the risk of
starting the power tool accidentally.
d) Store idle power tools out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions to
operate the power tool. Power tools are
dangerous in the hands of untrained users.
8
All manuals and user guides at all-guides.com
e) Maintain power tools. Check for
f) Keep cutting tools sharp and clean. Properly
g) Use the power tool, accessories and tool bits
5) BATTERY TOOL USE AND CARE
a) Recharge only with the charger specified by
b) Use power tools only with specifically
c) When battery pack is not in use, keep it
d) Under abusive conditions, liquid may be
6) SERVICE
a) Have your power tool serviced by a qualified
Additional Specifi c Safety Rules for
Drill/Drivers
• Wear ear protectors when impact drilling.
• Use auxiliary handle(s), if supplied with the
misalignment or binding of moving parts,
breakage of parts and any other condition
that may affect the power tool's operation. If
damaged, have the power tool repaired
before use. Many accidents are caused by
poorly maintained power tools.
maintained cutting tools with sharp cutting
edges are less lik
etc., in accordance with these instructions
taking into account the working conditions
and the work to be performed. Use of the
power tool for operations different from those
intended could result in a hazardous situation.
the manufacturer. A charger that is suitable
for one type of battery pack may create a risk
of fire when used with another battery pack.
designated battery packs. Use of any other
battery packs may create a risk of injury and
fire.
away from other metal objects like paper
clips, coins, keys, nails, screws or other
small metal objects that can make a
connection from one terminal to another.
Shorting the battery terminals together may
cause burns or a fire.
ejected from the battery, avoid contact. If
contact accidentally occurs, flush with
water. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from the
battery may cause irritation or burns.
repair person using only identical
replacement parts. This will ensure that the
safety of the power tool is maintained.
Exposure to noise can cause hearing loss.
tool. Loss of control can cause personal injury.

Publicité

Table des Matières
loading

Table des Matières