Stopping The Engine; Engine Maintenance - Power Fist 4650 Mode D'emploi

8962235

STOPPING THE ENGINE

Do not choke carburetor to stop engine. In an emergency turn the
engine switch to the OFF position to stop the engine.
Stop the engine by following this procedure:
1. Move the throttle lever to the MIN. position.
2. Turn the engine switch to the OFF position
3. Turn the fuel valve) to the OFF position.
CARE & MAINTENANCE
1. Maintain the tool with care. A tool in good condition is efficient,
easier to control and will have fewer problems.
2. Inspect the tool components periodically. Repair or replace
damaged or worn components.. Only use identical replacement
parts when servicing.
3. Only use accessories intended for use with this tool. Follow
instructions for changing accessories.
4. Keep the tool handles or gripping surfaces clean and dry.
5. Maintain the tool's labels and name plates. These carry important
information. If unreadable or missing, contact Princess Auto Ltd.
for replacements.
WARNING! Only qualified service personnel should repair the tool. An
improperly repaired tool may present a hazard to the user and/or others.

ENGINE MAINTENANCE

The following section includes a maintenance schedule, routine
inspection procedures and simple maintenance procedures using basic
hand tools. Service tasks that are more difficult or require special tools
are best handled by a technician or other qualified mechanic.
1. Maintain the engine with care. A well-maintained engine is more
efficient and less likely to have problems.
2. Follow instructions for servicing
www.princessauto.com / 1-800-665-8685
GASOLINE GENERATOR V1.0
Page 10